Home > News > Content

Seals Should Be Properly Installed To Prevent Deformation In Place

- May 17, 2018 -

Auto parts are the products that make up the entire unit of the car and serve the car. There are many kinds of auto parts. With the improvement of people's living standards, people are spending more on cars. The market for auto parts has also grown. In recent years, auto parts manufacturing plants are also rapidly developing.

First, use sealant as much as possible, if necessary, use paint substitute to achieve ideal sealing effect;

Second, the quality of the appearance of the rubber seals should be carefully checked before assembly; use special tools for press fit to avoid knocking deformation;

Third, according to the provisions of lubricating grease, regular cleaning dredge vents and one-way valve;

Fourth, the assembly is carried out under extremely clean conditions. The work surface of the part is free from bumps, scratches, burrs and other attachments.

Fifth, strict operating procedures, seals should be installed correctly to prevent deformation in place;

Sixth, master the performance specifications and requirements of seals, replace the failed parts in time;

Seventh, for the thin-walled part of the side cover, use the cold gold to do the correction; easy to wear the shaft hole parts can be metal spraying, welding repair, adhesive, mechanical processing and other processes to achieve the original size;

Eighth, nut slip wire breaks, looses should repair or replace new parts, and screw to the specified torque.

Related News

Related Products

  • Metal Mounting Bracket
  • Steel Logistic Strap Ratchet
  • Stainless Steel Stone Fixing Bracket
  • Hammer Bolt
  • Stainless Steel Bar Swizzle Stick
  • Garden Tools Pruner